Quote:
Originally Posted by Alvy
Sounds like a ground issue. Your model has the battery under the seat with a short negative cable attached to the frame. The engine is solid mounted to the frame so the frame is essentially the ground path. When it "clicks", what is your voltage across the battery? Also, what is the voltage at the A terminal of your generator? If both are good, Put a jumper cable on battery negative and the other end on the case of the generator. See if it cranks.
Edit: Tim beat me!
|
Ok. I checked the voltage at the A terminal starter generator when I turn the key and it is just over 12v. I cleaned the ground at the starter generator. I did put a jumper cable on the bat neg and the other on the generator and it did not crank still. Still just a click. I also attached jumpers from the batt negative terminal to the frame, and then again to the engine block- still just a click.