Quote:
Originally Posted by budscub
I believe you need to check real well the wire from the solenoid to the starter generator. Based only on what has been said in this thread and what troubleshooting you have done, it sounds as if the system is functioning. I suspect that you have a bad wire or termination on the wire that is carrying voltage but no amperage. Put your red booster cable on the generator side of the solenoid and the other end on the same post of the starter generator, hit the key and see if it will crank.
As J mech said if you could post a picture of the solenoid and how it is wired that would help a lot.
|
Ok= will try tomorrow. Will post pic tonight of what I have. Can take more pics tomorrow.