Quote:
Originally Posted by Yosemite Sam
It all depends on how well the cover is sealed to the casting.
I've added lower brackets to many rear ends and it's always a crap-shoot.
This is probably a good time to change the fluid and filter.
On a tractor that I know has good fluid and filter, what I have learned to do, is to raise the rear end of the tractor to the point that there is no fluid contacting the rear cover when you take the bolts out. You gotta raise them pretty high (almost standing them on end) especially a hydro. After you get the lower bracket added and tightened down, let the tractor back down and watch for drips the next few days.
Off hand I don't know the length of the bolts, I just use a Phillips screw driver to measure the depth of the holes and get the correct bolts out of the bin (I always use grade 8 bolts).
|
+1!!! Just be careful raising the rear end of the tractor--SAFETY 1st! I use ramps and my trailer or I suppose you could use ramps with the tailgate of your truck. Lock your ramps down and secure your tires.
Cub Cadet 123