Easy job, a 3/8" drill and you drill 1 or 2 holes at the lowest portion of the case. Depends on the design of the housing. Some have a hump at the bottom and they need 2 holes. Later cases don't have the hump so 1 hole is enough. Pic I posted has the hump and it got 2 holes. This pic is a later housing with 1 hole.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|