Quote:
Originally Posted by R Bedell
The 1340 has a Sundstrand (Sauer-Danfoss) 15U Hydrostatic drive unit it. There are manuals in out Technical Library Section.
Check to see if the input shaft to the Hydrostatic Unit is is running at the same speed (RPM's) as the drive shaft.
|
Roland
The 1340 has the CV drive shaft, the input for the pump is splined so it's not likely that the pump is not turning if the engine is running. My bet is a plugged filter or the check valves are stuck. That said I'm going with the standard "Change the fluid and filter" recommendation.
Edit: I love it when we hear "The fluid looks clean" "it's a little over full" Yep it has 2 QT's of water from condensation sitting in the bottom of the case from sitting for a long time. Start it up and instant plugged filter. Then we want to blame the pump. I've lost count on how many of these we have seen this year alone.