Quote:
Originally Posted by tinkerin tim
Hi Tash,
I just removed the elbow on mine. I soaked it with Kroil (better than PB Blaster), then I took a utility knife and actually cut(0r tried to) around the lock ring. You can actually get the blade in some places. Then sprayed more kroil. Then I took a chisel and whacked the ring and it moved freely. Then I put the largest punch I had(it just fit into elbow) and whacked that with a hammer until it screwed out.
I think that cutting around the ring really helped.
Hope this helps
Tim
|
i did almost the same thing, but i used a VERY tiny and thin file and after a few good whacks, it came off without a hitch. jeff
__________________
'72 108 w/ 38" HIGH speed deck, '77 1200QL w/ homemade grader blade, '79 1450 44" grass tamer, '70 sears super 12 w/ 3pt , 19?? 100 w/ extra toys, 69' economy powerking 14 horse w/ FEL, 65' economy powerking w/ toys, 1982 allis chalmers 716
Jeff
|