PTO problem
Thanks for the needle info Ol'George. Did the amp test this afternoon and it read it was drawing 3.55 amps. The info I downloaded from the Ogura site stated this: "If the meter reads significantly above or below 4.0 amps, there may be a shorted coil,faulty switch or battery causing the problem". I wonder what a significant amount is? Do you think less than 1/2 amp would cause it to quit working after it got hot? Got the PTO back on the tractor and will probably cut grass Mon. or Tue., and hope for the best. Thanks for every one's help and have a great evening.
Bob
|