Agree completely with Sam. Those set screws are HARD. Not only do you risk breaking a drill bit you risk destroying the threads. I had a couple that did not seem to budge. I filled the hole with a penetrating fluid, I believe I used PB blaster. I let it set for a day or two and finally using a new allen wrench got it out.
__________________
With my son, EricR Super 2084 with 54" mower, 451 blower. 2086 with 3 pt hitch, 54 inch deck, 551 blower, 54 in brinly blade. A 4 digit original w deck. A 70 with deck. 2 102s both with 42 in decks, one with creeper, 1 36 inch IH snow thrower CW36, 1 42 inch IH blade. 149 with mower. 2072 w 3 pt hitch, Johnny bucket, 60 in mower, 451 blower. Jacobson GT 10 with mower. DR Lawn vac tow behind,Home made lawn roller. Brinly cart, 2 off brand carts and 1 home made cart.
|