One thing to remember is that not all VR's are created equal = meaning wired the same. If your VR is wired 1 2 3 from bottom to top it does not mean your wires will go on the same posts on the new VR. I just replaced a VR on my 149 and the old VR had 4 wires F Bat Gen & Gnd on the bottom. The new one was F Bat L & Gen coming out the bottom. The new VR grounds thru the case so you have to make sure it's bare metal at the mounting screw holes. I had to leave the ground wire from the tractor disconnected and the L terminal unused and it's working just fine. Be 100% sure of where your wires are coming from and what the actual terminal your hooking it to does.
__________________
Tom
CC's - 108, 122, (2)124, 149, 1320
|