Here is a picture of the hydro trunion that usually needs to be welded up. It is the yellow section perpendicular to the grey cam bracket. If you look real good you can see filing marks where I welded it up then filed it down. The springs set inside that. Overtime the springs make the opening larger, making adjustments almost impossible until you get it repaired. Also the springs loose their tension over time. I replaced both springs and the guide ends, the round piece at each end of the spring.
__________________
DWayne
1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck
10" moldboard plow
2016 XT1 42" deck 18HP
|