Crankshaft question
I have an old pulling tractor that I am putting back to a working tractor. It is a 128 with the engine from a 1200 in it. It had a bad clutch failure that did a ton of carnage including tearing all the fins off the flywheel. When the clutch coupler let go the flywheel loosened up and sheared the key. It also bent up the threaded end of the crank. The threaded end appears to be screwed into the end of the crank. Could this engine have been built with a John Deere crank with an adapter in the end? Going to try and remove it tonight.
Jimmy
|