Is there a part available that would allow me to "gut" the original housing and replace the bearings in there with self-aligning/locking bearing like farmall_fred suggested?
BTW - As Jonathan stated, the block is used as a mount for the coil, via 4 screws that are arranged in a 2.590 diameter circle. The face or flat that coil is mounted against on the block is 1.412" rearward of the center line of the mounting bolts of the block.
__________________
1989 - Cub Cadet 1772
1987 - Cub Cadet 1572 w/Rear PTO & Cat. 0
38" Lawn Sweeper #196483
42" L42 (Bush Hog) Rotary Cutter # 190349
45" 2-Stage Snowblower # 196364
48" Haban Rotortiller Rear PTO Driven #190356
54" SnowBlade with hydraulic Angle #196376
60" Haban Mowing Deck #196374
|