Quote:
Originally Posted by J-Mech
Yours isn't OEM. Someone made it. Don't know where you got it, but the pic you posted is not the one made by CCC.
|
Here we go again. Here's a picture of an OEM part and a used part off IH Cub Cadet Warehouse. Which is the same as the one I have ( in middle) except the nut on the one side of mine was stripped so I removed it and welded another nut on to it and repainted it and put a new end and jam nuts on. I also have 4 others that came on 4 different tractors from 4 different places over many years that all have the same design. Obviously the small end is new but is as close to original as your gonna get and is the same as the one in the used one at IHCCWH. As usual you know more about my stuff than I do and I guess IHCCWH is selling Knock offs. I'm guessing the Russians are involved. My repairs might not be up to your standards but it is OEM
__________________
Charles________________________
1572 3pnt, rear PTO, 50" deck
1772 3pnt 50" deck, Brinly Plow, 54" Power angle plow
1872 3pnt, 44" deck, Brinly Plow, 54" Power Angle Plow
2072 3pnt 50" deck, Brinly Plow
2072 50" deck
Cub Cadet Tank 50 Zero Turn
Cub Cadet 33" Commercial Walk Behind
1953 Ih Cub with just about every implement
New Holland TC33D with Loader and Backhoe
|