Quote:
Originally Posted by TIMCRUTCHER
I measured some I had replaced and it was .460
BTW you are supposed to answer questions, not ask them.
|
Thank you Sir. I don't have all the answers all the time but I know how to get the answers.
Reason for this is that I got an 1863 carcass and a set of 10" wide JD wheels a few years ago from Leadslingingdaddy that I made into a 1641. The backspacing on the wheels caused the rim to hit the brakes. I put a 3/8" spacer on it and all was good. Fast forward to last week and I decided to switch mower decks from the 48 I had on it to a 46 and the tires hit the deck. I ended up putting a set of Cub wheels on that tractor but I need to correct the problem so that I can use the JD rims on my 1864. The studs are too short to use the JD wheels on the tractor that I want to put the JD wheels on, I can only get about 3 threads to catch. My guess is someone changed the studs on the 1863 because it looks like all the stuff I researched use the same stud. I can get longer studs, just needed to know what size to order and you had the answer. Off to Summit Racing we go.
