Quote:
Originally Posted by Bits-n-pieces
I know this is not a Cub Cadet, but have found good help here before:
Working on a Kohler engine on a piece of machinery and do not have spark to motor.
12 V going into coil 12 V coming out of Coyle but no spark at plug?
What am I not seeing?
Could cool be bad?
Brian
|
Put your volt meter/test light on the points side of the coil and spin the engine. You should see intermittent voltage or a flashing test light.
If you have neither, you likely have a dirty set of points or point not breaking the circuit.