Quote:
Originally Posted by J-Mech
You're adjusting the high idle screw on the governor, right?
Is the cable pulling the governor lever all the way to the stop?
Is the dash throttle maxed out?
Did you readjust the governor?
Kohler wants all their engines idling too fast. I'd slow it down.... like a lot. 5-600 idle speed is really plenty. Just enough speed you can move it around without it dying. If it doesn't have a 60" deck, I would say just fast enough to be able to kick the deck on at idle without it dying.
|
I made this mistake last week on a CV490. I kept adjusting the screw and nothing was happening. Then I noticed that the arm was not hitting the screw and I adjusted the control cable.
Cannon