Lets try this again....
Quote:
Originally Posted by jimbob200521
I am adjusting the high idle screw
|
The screw on the
governor?
Quote:
Originally Posted by jimbob200521
The cable is pulling the governor lever to the stop
|
Well, then keep turning the screw until it makes a difference. If it's out all the way and you still can't get more speed, your missing something obvious.
Quote:
Originally Posted by jimbob200521
Dash throttle is maxed out
|
Dash throttle can't be maxed out if the cable is still pulling the governor arm to the stop. I meant, is the dash throttle maxed out, as in it can't pull the cable any farther because it's not adjusted right..... not are you running it all the way to the top. I want to know if you ran out of travel on the actual lever and it's limiting the speed.
Quote:
Originally Posted by jimbob200521
I did readjust the gov (that answer was at least in the op  ) |
Missed that.
What about spring position? Did you check to see that the spring was in the starting position holes?