If anyone has ever pulled that rearend apart and put gobs of silicone on the bolts to seal them up, the silicone will bunch up on the Bold dry out come detached from the rear end and go into the sump had this happen on an 1864 that I bought a couple years ago. Previous owner had the rear end apart and used a silver silicone-based sealant on the bolts. That stuff has flaked off and got into the suction tube ahead of the hydro filter and plugged it up. I just Jack the front end remove the hydraulic filter clean the stuff out, spin the filter back on, and it works good. The chunks are always huge.
__________________
1- 1864 Dual hyd, cat 0, axle braces
1- 1450 Dual Stick w/ power steering
1- 1200 in pieces
1- 1864 in pieces
QA36A Thrower, #1 Tiller w/ extensions, IH windbreaker, IH wheel weights, 44C mower deck, 50C mower deck, CCC 54" Blade, GT46 high vacuum deck, GT54 deck, Cub Tripple Bagger, Custom dozer blade, Custom suitcase weights, 3pt cultivator, lawn sweeper, original R-Bucket
|