Copied from previous thread on the subject, these were the codes I used:
--------------------------------------------
Here is what I came up with from prismatic powders:
IH Red: P-105S/Solid Tone
CC Yellow: PSS 4571/Solid Tone
CC Beige(935): USS 2242/Solid Tone
CC Implement: PSS 3043/Solid Tone
Epoxy Primer: ESS-6518
These colors were matched via an archive search, from fresh Martin Senour Paint samples that I sent to have archive matched. They are pretty close (from my eye). If my paint wasnt mixed properly then they could be off, and certainly if you were matching existing paint they likely wouldnt match due to the old paint being faded.
|