Quote:
Originally Posted by finsruskw
My last 2 decal were from MH. The 126 from a year ago and my recently completed 104 this past spring.
On both dash decals, after lining up the holes for the ammeter and steering column, the slot for the throttle lever had not enough material on the 126, left the original turtle and rabbit sticking out from under the decal w/the decal rabbit and turtle showing above as well as 1/4' of the dash tin showing on the sides.
On the 104, too much mat'l on the left side where the excess draped down into the slot, and not enough on the right side leaving about 5/16" of the dash tin showing.
There is no way their decal was tested for fit on an actual dash tin.
|
Unless they own every model of Cub they wouldn't be able to test fit, i'm sure most of their decals are made from pics and measurements given to them.