My 100 had the same issue when I got it. I ended up having to rework the piece that attaches to the front of deck. Mine was bent and it made the deck hang low in front. I welded on the arm that runs up to the rockshaft at a slight angle to the arms running to the deck to raise the front of the deck. This is the only pic I can find that shows the angle. I also added a belt guide to keep the belt from flying off.
__________________
Adam
1964 Model 100 w/ K301 12hp and custom hydraulics
1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone
|