Quote:
Originally Posted by Baccarat
I could be wrong, so I'll wait for Jon's approval before committing.
|
Make the bar if it's missing, or find a used one.
Quote:
Originally Posted by Baccarat
Jon - This is my first full tractor, cut me some slack. It was even confusing to Ironman.
|
No surprise there.
Listen. You're making this about 10 times harder than it needs to be. The CP2E manual is very clear. I'll even point to the page number. Page 20, part call-out #7. It is the part that has the fork on it that goes over the fender support rod. It gives a part number for that part. If you read at the top of the page, just above the pic, it states: "For SN# 400,000 and below." That hitch is for a NF. The next subframe available is on page #30. While it does not state a SN# break, it states (in the description which is actually on page #29) it is for a build date of "1971-1974". Guess what. That is the year they released the first WF tractors. AND, if you check the part numbers of the part mentioned above, (both are call-out #7, incidentally) guess what. Different part numbers. So is the main frame (call-out #9).
YOU HAVE A NF SUBFRAME. It's just that easy.