Well, the hard part is getting the 6 set screws out so you're on the downhill now. You're going to have to hammer on either side of the PTO hub towards the front of the tractor obviously to remove it. I recommend using something soft, most use a piece of wood. It will come off if you strike evenly side to side. Spray some PB in all the set screw holes and let it soak.
Contact member jeffinpa as he has a slick basket pulley removal tool. You don't have to slide it forward much to get your bolt in. Remember to use the correct length. Good luck
__________________
(2) Original, 100, 102, 124, 73, 800, #1 and #2 cart, brinly plows, disk, IH184, IH244, 1948 F Cub
|