Quote:
Originally Posted by kwduffy
To get to some of them spots you might have to wait till the paint is all the way dry and then flip the frame over so you can get the underside of the frame rails.
|
After seeing the pictures, I went back out there and grabbed my trouble light and went around it. All you could see with it was the side of the brake pedal was light and the side of the lift cylinder bracket. Right or wrong, I mixed up a little bit of paint and shot those areas and tried to get under the rails another shot and down by the hydro and the lift valve.
I'm gonna leave it alone. It's not a show tractor and at least the primer is better than rust!!:biggrin2.gif: