Quote:
Originally Posted by bkw3614
Working on the 782.
The lever that controls the hydraulic lift is completely frozen. Are there any ideas on how to free it, or will that happen once oil runs through the system once again?
Also, the hydrostatic transmission lever is stuck as well. Is there a possibility of internal damage to the transmission or pump, or are most of those problems linkage related?
Thank you. I appreciate the expertise and input.
|
PB and time "usually" will free it up. Take a block of wood, and
TAP the lever after a good soaking.
As for the go lever, pull the tunnel cover to check that the linkage isn't bent, or binding someplace. If everything looks normal, disconnect the rod to the pump trunnion, and see if the trunnion swashplate is free to move...
If so, move toward the lever from there to find where the stuck area is.