Learned enough to know I've not learned enough
Thanks for your comments and suggestions. Since my initial post I have installed a new wiring harness and have proven that it is difficult, but not impossible, with a little common sense. I used the old harness as a pull for the new harness around the flywheel. One of my lessons learned was checking the solenoid mount for a good ground. Since then I have been using the tractor and the rake attachment. My next move is to determine the best way to adjust the hydro. I've been reading the comments on this site to help me figure it out. With a narrow frame , I've got to do it from below and it does not sound easy with the tractor running and me underneath. I'll ask the folks on the site what techniques they have used over the years to accomplish this adjustment.
|