http://www.surpluscenter.com/Hydraul...9-6801-6-6.axd
This is the fitting you need, it is SAE 6 by jic 6. Like Jmech said, nuts and ferrules from McMaster-Carr. 3/8 OD steel brake line from Napa or wherever.
Just look for a 37 degree flaring tool on eBay. 45-degree will work but if you're buying a tool just for the job might as well go with the correct flare angle
__________________
1- 1864 Dual hyd, cat 0, axle braces
1- 1450 Dual Stick w/ power steering
1- 1200 in pieces
1- 1864 in pieces
QA36A Thrower, #1 Tiller w/ extensions, IH windbreaker, IH wheel weights, 44C mower deck, 50C mower deck, CCC 54" Blade, GT46 high vacuum deck, GT54 deck, Cub Tripple Bagger, Custom dozer blade, Custom suitcase weights, 3pt cultivator, lawn sweeper, original R-Bucket
|