Quote:
Originally Posted by Vrobert
I have a 46" MTD blade that is the correct width for the wide frame. It has quick pins that fit the front two holes in the cub frame. I just need to chop up a mule drive and weld it to the blade mount so that it snaps into all the correct mounting points. I also want to convert the blade to hydro lift. It has the long hand lift that barely works. I'll start another thread with my blade ideas and include pics.
Thanks again guys.
|
Just find a wide frame blade and use it. They are usually only about $100-$125. Angle will be a bit odd for the cyclops, but if you can weld, it's pretty easy to change that. Whole lot easier than trying to completely modify a blade to work on a tractor it wasn't made for.