Cub cadet 1200 drive shaft problem - help!!
Anyone happen to have the measurement from the center of the rear flange hole to the end of the drive shaft?
Mine is 1 1/4", it should be shorter.
When running, does the driveshaft ride tight to the ball inside the flange?
I bought this shaft from Jensales. I decided to mount the engine solid and also took the ball out of the tranny input flange and mounted the drive shaft solid as well. After about 2 minutes of test driving, my feet were almost completely numb. Too much vibration for this guy!!
So, Im going back to the antivibe system. I put the ball back in the input shaft flange and was about to reinstall with the flex coupler but the drive shaft is too long. From the drive shaft flange to the flex disc is approximately 3/8" of open space.
|