One more post before I put this one to bed. Anyone reading this post later on getting ready to do this job I highly recommend doing the front seal and the breather gasket at the same time. You can do both with the engine in the frame but that breather gasket would have been much easier on the bench with the rear shroud off, tough getting the other shrouds off and out from under the one covering the flywheel.
The rear seal fixed most of my leaks but had to do the front seal and breather gasket this weekend as they were both leaking too, think I got it all now though. Here are the part numbers to order:
Rear seal: KH-24-032-19-s
Front seal: KH-25-032-06-s
Breather gasket: KH-24-041-67-s
|