05-17-2018, 04:29 PM
|
 |
Member
|
|
Join Date: Mar 2014
Location: Morganton, NC
Posts: 72
|
|
Quote:
Originally Posted by J-Mech
Since no one else seems to know......
If you are considering replacing the hydro in a 125 with a BDU-10, forget it. Linkage is different, pump is different. No, it isn't a Sundstand, it's a Hydro-Gear. Yes, it will bolt up to the rear, but the rest won't work without mods. Besides, it isn't near as good of a hydro as the U-15. The Sundstrand units almost never fail. If you have an issue with the hydro in the 125, ask some repair questions. Even if it is bad and needs replaced, there are usually 20 of the old Sundstrands on ebay for about $100. No comparing the two, they are very different internally.
|
Thanks for the input. Not planning on switching, just need to compare the output torque to the BDU-10
|