[cooperino]

Hey, sorry for the typo there.

After looking at both units and doing some measuring, really not all that bad of a conversion. I will build a small "sub frame" to be fitted on top of the 46" deck. This will have hardware to make up the small span difference of the two different sub frames of units. The lift will still work the same way other than I might lose 1" "height of my subframe" from the top of my lift height. I never mow with it this high anyway and have no obstacles in yard that force me to raise deck to full height. If for some reason the 126 doesn't "have the balls" which it should since my 1211 12HP does. Its a simple change of pulley size to get desired power and torque ratio.

Thanks for the help guys