Ok , so first things first measurements...,,
King pin to drag link hole 3 1/4 inches center to center.
Frame and hole for drag link. 2 inches exactly. How you got that off a picture, I'll never know, impressive never the less....
To j-mech. You knowledge about these things is amazing. But I'm not seeing the front wheels being 3inches forward, compared to the stock front end. But I don't have the 104 here to compare. As far as the drag length. I'm pretty sure i adjusted this one to roughly the same length as the stock one. Man! I don't remember!! And yes, jacked up, everything was greased and no binding. I am way out of my depth on this one....wish I was better at geometry. I flipped the drag link arm around, taking for a test drive now.
__________________
Nate
|