Quote:
|
So what I have been doing is turning the key till it starts then real quick turn it to the off position to keep it running.
|
This is opposite of what is suppose to be. During the "OFF" position, the Ignition Switch closes a path to ground, shorting out the Kill Wire from the M-20.
You stated you replace the Ignition Switch. Did you install 725-3163 ----->
925-3163 and is it wired correctly...??
Switch Terminal Legend:
B = Black Wire
R = Red/White Wire
S = Red/Black Wire
L = Blue Wire
M = Yellow Wire
Note: The Switch has to be properly grounded
Please examine and advise.
