[J-Mech]

Originally Posted by R Bedell

Tim:

Sorry, for rude or snide comments.

(A) Download the Wiring Diagram for the Wiring Section (page 5) in the Technical Library.

(B) Once in hand, examine your new harness to make sure your tractor is wired as indicated in the diagram.

(C) If you are sure, the tractor is wired correctly, then it is time to dig out a meter, either an analog (VOM) or a Digital (DVM)

(D) With meter set to read DC Voltage, at least 20V, connect the meter Black lead to the Battery Negative Terminal.

(E) Starting at the Battery, with the meter's Red lead, start probing at the battery and make sure you have 12V. With diagram in hand, work in a forward sequence (per diagram), until you find an absence of 12V.

Let me know what you find.

You said the exact same thing I did.