Quote:
Originally Posted by J-Mech
Pretty sure the PTO on a KT/Mag will bolt right on a K.
|
I think so too, but I've never done it. But if he's got a roller, he probably doesn't have a Mag/KT/spread frame K series PTO to go with it.
Quote:
Originally Posted by Mudrig150
The engine I'm putting on has the PTO on it. It's missing most of the parts, (Muffler elbow, coil, carb, etc.) But I guess I'll see if it works when I get there.
|
You've got a quietline PTO on it. The 82 series PTO is a bigger pulley (same diameter, but 5/8" instead of 1/2"). Not a huge deal, but the spread frame mule drive is going to have 5/8" pulleys and so would an 82 series implement (snowthrower, deck, tiller etc). You can swap the pulleys around to 1/2" (or just run a 1/2" belt on it...it'd probably work ok-ish).