Quote:
Originally Posted by J-Mech
Boy you and I just aren't communicating very well...
So, this deflection you are reporting....that's with the charge pump off?? If so, that is no help at all. I thought the measurement you gave was with the pump on.
I don't see how a new bearing in the charge pump will change shaft movement unless it is bolted on.  |
ha ha communication is poor I agree , and its not easy in a forum environment - I stated numerous times the pump was off if you read through my posts though
"So ..I finally got to take the charge pump off and see what was going on. There is some play to the input shaft when I wiggle it so it looks like the ball bushing has worn out."
im talking about the bearing sitting behind the case here I can see
"No , I think we are on the same page, I have the charge pump off and the input shaft is sticking out."
btw There was similar play in the shaft with the pump on and with the pump off.
so your saying my test is useless with the pump off and that the shaft is expected to move in its bearings with the pump off then?? , I would expect that shaft to sit like a rock in the bearings behind the case...but o.k.
I think we are getting something confused between us here
Tom