Quote:
Originally Posted by cooperino
When you measured the voltage.. Did you measure between both AC wires? Or one AC wire to ground?
Also, Are you sure there is a good connection from Battery wire on VR? Sounds like your just reading low battery voltage. I would do all this with a fully charged battery.
|
I just went out and retested. Battery is fully charged:
- Left AC contact to ground - 48V
- Right AC contact to ground - 0.01V
- Across both AC contacts - 47-48V AC
- B+ to ground - 12.0V DC
Is that right AC contact supposed to be measuring that low? And I have not inspected the battery wire yet. It disappears up under the engine cover and I'm not sure where it comes back out.
Sounds like I need to install a ground wire.
Thanks!