Quote:
Originally Posted by R Bedell
You could run a loop to a finned radiator inside the cab. You would have to design a bypass circuit to turn on/off and/or moderate the coolant as the temp inside the can became too warm. A Circulating Fan would be even nicer.
Lot of things to think about.
|
I believe JD makes a kit that has a heater core, fan, branch hoses, controls, etc for their liquid cooled models. Probably lists for half the cost of the tractor.
Actually, not sure if made by JD or an aftermarket, but it's available. I've never come across one made by CC or aftermarket for a 3000 series.
The cab and blower are on a 3235, I don't have a liquid cooled Kawi (yet). I want see if anyone else has done it and explore what it would take. If feasible I'll start hunting for a 3205 with a bad rear or hydro selling for a good price. There was one for sale a few months ago about 2 hours from me. Hydro pump was bad, asking $500. I should have jumped on it but sat on the fence too long. By the time I called it was sold.