[AL Farmall Boy]

I’ve put together a couple of (bad) drawings showing my first idea. Thinking of using a thin shiny aluminum diamond plate for this. A few of my concerns are:

(a) I will attach the hinge to the boxed-in void area of the lid so no holes will protrude through the box…..what is best way to attach so it doesn’t work its way loose?

(b) Should I weld aluminum flat bar or angle around the diamond plate on the 3 outer side to strengthen and allow the foam to be “encased”?

(c) If this is do-able do you know anyone that does laser cutting? Price? If too expensive, it MIGHT work out cutting that logo with a cutting blade on a grinder.

Here is a rough idea of what I am talking about (plain reference pictures first, my drawings, & an example of tool foam at the end). Colors by no means are demonstrating what I am wanting with finished product, except for the IH logo. In these drawings, they are just for clarity. After looking at this, let me know if you have any questions. Dimensions of the rectangular recessed area in the lid are 69 inches long x 9 3/8 inches tall. I didn’t get a depth measurement.