Quote:
Originally Posted by yingpin
Jeff, I will send you a PM.
I did save the old switch to see if I can get it cleaned up. The weights don't line up. They are about 1/4 too shallow (the slots) and the bolts wont go through. I am going to take an angle grinder to try and grind them down but its going to take a while since it is 2" thick.
We may be expecting some snow this weekend so I was hoping to get them figured out before then and then I will pull out the chains that came with it. I put the plow blade on tonight as well.
How do you guys determine when to use the blower vs. plow blade? I know the older throwers are not good for wet snow but lets say 3 inches of dry snow. Plow or Throw?
|
I prefer the QA-42 snow thrower on my 125 versus the blade. I have two tractors ( both 125's ) and don't even bother putting the blade on the other one except when I have to move dirt.
~~~~~~~~~~
Since the slots need to be deeper, could you use some 5/16 or 3/8 all thread to hold the weights in place since you have snow coming? That would distort easy enough to probably work.