Quote:
Originally Posted by 35boulder
So I'm still trying to get this (new to me and this 100) sleeve hitch installed. I have installed the rear pivot to the frame under the seat. I have tried to attach the lift plate to the lift bar and pass it along the inside of the frame to where it attaches to the ratcheting lift bar but the lift plate will not pass the frame bolts.
So I next separated the lift bar from the lift plate and installed the lift plate by itself to the ratcheting lift bar but there is not enough room to then get the lift bar over the pivot on the lift plate. I have looked at the chassis manual but there is no mention/directions on installing one of these. So i'm asking again for any help or directions on how to complete this. Thanks again.
|
On my former 122, I had to remove the curved, slotted plate to get the lift bar and plate ( assembled ) into position.
I will admit the "universal adjective" was used quite a bit.
Jeff