I replaced the condenser at the same time I replaced the points. I fabricated a stainless steel gas tank from 4" pipe, removed the settling bowl and installed new tubing, an inline fuel filter and petcock. I'm stumped. It has done this stall out thing since day one. When I rebuilt the carb I dismantled it and ran it through an ultrasonic bath cleaner and blew compressed air thru every port or hole I could see. I'm convinced it's fuel related as well but other than out right replacing the carb I don't know what to do. The only ignition part I haven't replaced is the coil. I haven't tried pulling the choke before it stalls. I will try opening the high speed screw 1/2 a turn.
|