So I finally got back out to the farm today for a few hours. I got there with renewed vigor and determination to solve this issue. I inspected everything you guys suggested earlier. Both arms seemed to raise up to the cross member and everything appeared to function correctly. I even went to the effort of switching the mule drive and deck from the 149 to see if that made a difference. Nothing really changed. I get it adjusted close to even, run the lift up and down, and it's all wrong again. I've adjusted and fiddled with everything I can think of. It just seems to pick up one side and put the other down almost to the ground. Still a lot of difference there. I checked the spirol pins holding the lift arms. They aren't sheared off. Both of them seem to be sticking down out of the bottoms of the holes, they don't come all the way to the top. It's like that on both arms. They seem to lift correctly but I think I should try and drive them back up some. If I can find a way to make it happen that is. I'm sorry, I wasn't able to do anything about any pictures right now. Having some computer issues here lately. I'll se what I can do though.
Thanks,
Brad
|