The brake pedal switch needs to be bypassed because you are going to attempt to crank engine without brake pedal down. The reason is when you push the brake pedal down the hydro lever moves to neutral however it would seem your neutral position is not really neutral. So the brake pedal needs to stay up while doing this. Therefore you need to bypass the brake pedal switch. Its under the tractor. Follow the brake pedal rod till you see it. Join the 2 wires from the connector together. A paperclip works fine for a temporary jumper.
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641
|