Quote:
Originally Posted by sawdustdad
You moved the neutral adjustment bracket. That's the problem.
It's not in neutral any more with the brake pedal down. Put it up on jack stands. Bypass the brake pedal switch, move the speed lever while you try to start it. It will start. Hit the brake pedal and see where it is. It will be moving one way or the other. With it still running, adjust the neutral adjustment bracket as described previously.
|
At this point - I'd say no need to bypass the switch - being that it now starts normally (?) So just jack up (can't get my stands under the axle - doesn't fit in there so I just have a few bricks / boards under the edges of the mower deck to keep the thing on an even keel, so-to-speak) and make small adjustments to the bracket position? Manual says to move the bracket as high as it can go - then shift lever in forward.