IF your VOM or DVM is accurate, then anything less than 3 Ohms indicates a short.
If you want to spend some extra time on this, you could remove the field coil assembly from the Tractor. Wash and clean it up real good. Let the Field Coil dry (or blow dry). Then retake your ohmerage readings again. If still less than 3 Ohms, then the Field Coil is toast.
IF you readings are in the Factory range (3 to 4 Ohms), then you can seal the cracks in the potting material with something like JB Weld.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|