Quote:
Originally Posted by ol'George
I would be very surprised that yammer did something like positive ground as it really screws with electronics.
And reversing polarity can let the "magic smoke out" of components rendering them non compliant 
Here is a evil pray listing on used starters.
Does yours look like this after you reassembled it?
I'm still thinking you have the steel housing either end for end or 1/2 turn off.
But I have been wrong.
Listing number:
201663021577
Also google anything you can on wiring schematics/wiring diagrams for your sled if you haven't already. 
EDIT:
look at the alignment marks in picture 5 (enlarge it) on the aluminum gear end housing where it mates to the steel field housing.
Verify you assembled it that way. |
I found a diagram, it is hooked up right. That does look like my starter. I didn’t have the housing off, only the end cap. I’m going to double check everything later today.
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub
38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart
     
|