Thanks for the replies!
The belt number was found on some parts diagram of the mule drive I found online..
Here is how it was listed on the order... “ MTD Cub Cadet 754-3048 954-3048 made with Kevlar Replacement Belt”.
I have never had, or dealt with, any type of lawn/garden tractor so I could have easily put something back wrong when putting the deck back on.
Belt seems routed right except for going through that hanger bracket spot.
Including a photo I took that shows the pulleys and somewhat shows how the belt is routed. Not sure whY pics I needed when these were taken.
Also, Something could have gotten bent (or just pushed out of place when the hanger let go on the left side while mowing.
Belt is not loose. at least it appears very tight, but some of that is the hanging bracket “laying” on the top of the belts as shown in the earlier pics. Will check the tech section and make sure routing is correct.... thanks for directing me there. Couldn’t find any routing info when I googled before.
Thanks again for the replies... and patience with the ignorant! :-D
|