I got it sorted out. I used a 1/2” x 36” rod and heat bent it at the ends to 32.5”, drilled pin holes and cut off the excess 1” or so from each end. It looks good as new.
EFADDFD8-1950-4CB7-9BB4-79997E9FF6B8.jpg
8810589D-8542-4C05-AB82-7A67047CE8E5.jpg
__________________
1872 with 50C deck
1862 with 50C deck
1641 with 48GT deck
364 snow blower
IH Cub Original with deck
GREEN 317 with integral sleeve hitch, front hydraulic
|